# Telegraf Configuration
#
# Telegraf is entirely plugin driven. All metrics are gathered from the
# declared inputs, and sent to the declared outputs.
#
# Plugins must be declared in here to be active.
# To deactivate a plugin, comment out the name and any variables.
#
# Use 'telegraf -config telegraf.conf -test' to see what metrics a config
# file would generate.
#
# Environment variables can be used anywhere in this config file, simply surround
# them with ${}. For strings the variable must be within quotes (ie, "${STR_VAR}"),
# for numbers and booleans they should be plain (ie, ${INT_VAR}, ${BOOL_VAR})

# Config Sample under https://github.com/influxdata/telegraf/blob/master/etc/telegraf.conf

# Global tags can be specified here in key="value" format.
[global_tags]
  # datacenter
  dc="fzirker.lan"

# Configuration for telegraf agent
[agent]
  ## Default data collection interval for all inputs
  interval = "10s"
  ## Rounds collection interval to 'interval'
  ## ie, if interval="10s" then always collect on :00, :10, :20, etc.
  round_interval = true

  ## Telegraf will send metrics to outputs in batches of at most
  ## metric_batch_size metrics.
  ## This controls the size of writes that Telegraf sends to output plugins.
  metric_batch_size = 1000

  ## Maximum number of unwritten metrics per output.  Increasing this value
  ## allows for longer periods of output downtime without dropping metrics at the
  ## cost of higher maximum memory usage.
  metric_buffer_limit = 10000

  ## Collection jitter is used to jitter the collection by a random amount.
  ## Each plugin will sleep for a random time within jitter before collecting.
  ## This can be used to avoid many plugins querying things like sysfs at the
  ## same time, which can have a measurable effect on the system.
  collection_jitter = "0s"

  ## Default flushing interval for all outputs. Maximum flush_interval will be
  ## flush_interval + flush_jitter
  flush_interval = "10s"
  ## Jitter the flush interval by a random amount. This is primarily to avoid
  ## large write spikes for users running a large number of telegraf instances.
  ## ie, a jitter of 5s and interval 10s means flushes will happen every 10-15s
  flush_jitter = "0s"

  ## By default or when set to "0s", precision will be set to the same
  ## timestamp order as the collection interval, with the maximum being 1s.
  ##   ie, when interval = "10s", precision will be "1s"
  ##       when interval = "250ms", precision will be "1ms"
  ## Precision will NOT be used for service inputs. It is up to each individual
  ## service input to set the timestamp at the appropriate precision.
  ## Valid time units are "ns", "us" (or "µs"), "ms", "s".
  precision = ""

  ## Override default hostname, if empty use os.Hostname()
  hostname = ""
  ## If set to true, do no set the "host" tag in the telegraf agent.
  omit_hostname = false


###############################################################################
#                            OUTPUT PLUGINS                                   #
###############################################################################

# Configuration for sending metrics to InfluxDB
[[outputs.influxdb]]
  ## The full HTTP or UDP URL for your InfluxDB instance.
  ##
  ## Multiple URLs can be specified for a single cluster, only ONE of the
  ## urls will be written to each interval.
  # urls = ["unix:///var/run/influxdb.sock"]
  # urls = ["udp://127.0.0.1:8089"]
  # urls = ["http://127.0.0.1:8086"]
  urls = ["http://192.168.16.5:8086"] # required


###############################################################################
#                            INPUT PLUGINS                                    #
###############################################################################


# Read metrics about cpu usage
[[inputs.cpu]]
  ## Whether to report per-cpu stats or not
  percpu = true
  ## Whether to report total system cpu stats or not
  totalcpu = true
  ## If true, collect raw CPU time metrics.
  collect_cpu_time = false
  ## If true, compute and report the sum of all non-idle CPU states.
  report_active = false


# Read metrics about disk usage by mount point
[[inputs.disk]]
  ## By default stats will be gathered for all mount points.
  ## Set mount_points will restrict the stats to only the specified mount points.
  mount_points = ["/hostfs", "/hostfs/mnt/sdcard"]

  ## Ignore mount points by filesystem type.
  ignore_fs = ["tmpfs", "devtmpfs", "devfs", "iso9660", "overlay", "aufs", "squashfs"]

[[inputs.disk]]
  # Festplatte lange schlafen lassen :)
  interval = "12h"
  mount_points = ["/hostfs/mnt/wdhdd"]


# Read metrics about disk IO by device
[[inputs.diskio]]
  ## By default, telegraf will gather stats for all devices including
  ## disk partitions.
  ## Setting devices will restrict the stats to the specified devices.
  # devices = ["sda", "sdb", "vd*"]
  ## Uncomment the following line if you need disk serial numbers.
  # skip_serial_number = false
  #
  ## On systems which support it, device metadata can be added in the form of
  ## tags.
  ## Currently only Linux is supported via udev properties. You can view
  ## available properties for a device by running:
  ## 'udevadm info -q property -n /dev/sda'
  ## Note: Most, but not all, udev properties can be accessed this way. Properties
  ## that are currently inaccessible include DEVTYPE, DEVNAME, and DEVPATH.
  # device_tags = ["ID_FS_TYPE", "ID_FS_USAGE"]
  #
  ## Using the same metadata source as device_tags, you can also customize the
  ## name of the device via templates.
  ## The 'name_templates' parameter is a list of templates to try and apply to
  ## the device. The template may contain variables in the form of '$PROPERTY' or
  ## '${PROPERTY}'. The first template which does not contain any variables not
  ## present for the device is used as the device name tag.
  ## The typical use case is for LVM volumes, to get the VG/LV name instead of
  ## the near-meaningless DM-0 name.
  # name_templates = ["$ID_FS_LABEL","$DM_VG_NAME/$DM_LV_NAME"]


# Get kernel statistics from /proc/stat
[[inputs.kernel]]
  # no configuration


# Read metrics about memory usage
[[inputs.mem]]
  # no configuration


# Get the number of processes and group them by status
[[inputs.processes]]
  # no configuration


# Read metrics about swap memory usage
[[inputs.swap]]
  # no configuration


# Read metrics about system load & uptime
[[inputs.system]]
  ## Uncomment to remove deprecated metrics.
  # fielddrop = ["uptime_format"]



# Read metrics about docker containers
[[inputs.docker]]
  ## Docker Endpoint
  ##   To use TCP, set endpoint = "tcp://[ip]:[port]"
  ##   To use environment variables (ie, docker-machine), set endpoint = "ENV"
  endpoint = "unix:///var/run/docker.sock"

  ## Set to true to collect Swarm metrics(desired_replicas, running_replicas)
  gather_services = false

  ## Only collect metrics for these containers, collect all if empty
  container_names = []

  ## Set the source tag for the metrics to the container ID hostname, eg first 12 chars
  source_tag = false

  ## Containers to include and exclude. Globs accepted.
  ## Note that an empty array for both will include all containers
  container_name_include = []
  container_name_exclude = []

  ## Container states to include and exclude. Globs accepted.
  ## When empty only containers in the "running" state will be captured.
  ## example: container_state_include = ["created", "restarting", "running", "removing", "paused", "exited", "dead"]
  ## example: container_state_exclude = ["created", "restarting", "running", "removing", "paused", "exited", "dead"]
  # container_state_include = []
  # container_state_exclude = []

  ## Timeout for docker list, info, and stats commands
  timeout = "5s"

  ## Whether to report for each container per-device blkio (8:0, 8:1...) and
  ## network (eth0, eth1, ...) stats or not
  perdevice = true

  ## Whether to report for each container total blkio and network stats or not
  total = false

  ## Which environment variables should we use as a tag
  ##tag_env = ["JAVA_HOME", "HEAP_SIZE"]

  ## docker labels to include and exclude as tags.  Globs accepted.
  ## Note that an empty array for both will include all labels as tags
  docker_label_include = []
  docker_label_exclude = []

  ## Optional TLS Config
  # tls_ca = "/etc/telegraf/ca.pem"
  # tls_cert = "/etc/telegraf/cert.pem"
  # tls_key = "/etc/telegraf/key.pem"
  ## Use TLS but skip chain & host verification
  # insecure_skip_verify = false


# # Monitor disks' temperatures using hddtemp
# [[inputs.hddtemp]]
#   ## By default, telegraf gathers temps data from all disks detected by the
#   ## hddtemp.
#   ##
#   ## Only collect temps from the selected disks.
#   ##
#   ## A * as the device name will return the temperature values of all disks.
#   ##
#   # address = "127.0.0.1:7634"
#   # devices = ["sda", "*"]


# HTTP/HTTPS request given an address a method and a timeout
[[inputs.http_response]]
  ## Deprecated in 1.12, use 'urls'
  ## Server address (default http://localhost)
  # address = "http://localhost"

  ## List of urls to query.
  urls = [
    "https://florianzirker.de",
    "https://cloud.florianzirker.de/login",
    "https://wallabag.florianzirker.de/login",
    "https://gitea.florianzirker.de/api/v1/version/",
    "https://meet.florianzirker.de/",
    #"https://www.feuerwehr-kapsweyer.de",
    "https://ping.feuerwehr-kapsweyer.de",
    "http://ping.feuerwehr-kapsweyer.de",
    "http://portainer.lan",
    "http://gpxviewer.lan",
    "http://traefik.lan/dashboard/",
    "http://heimdall.lan",
    "http://monitoring.lan/login",
    #"http://solarmaxpi.zirker.lan"
  ]
  interval = "60s"

  ## Set http_proxy (telegraf uses the system wide proxy settings if it's is not set)
  # http_proxy = "http://localhost:8888"

  ## Set response_timeout (default 5 seconds)
  response_timeout = "10s"

  ## HTTP Request Method
  method = "GET"

  ## Whether to follow redirects from the server (defaults to false)
  follow_redirects = false

  ## Optional HTTP Request Body
  # body = '''
  # {'fake':'data'}
  # '''

  ## Optional substring or regex match in body of the response
  # response_string_match = "\"service_status\": \"up\""
  # response_string_match = "ok"
  # response_string_match = "\".*_status\".?:.?\"up\""

  ## Optional TLS Config
  # tls_ca = "/etc/telegraf/ca.pem"
  # tls_cert = "/etc/telegraf/cert.pem"
  # tls_key = "/etc/telegraf/key.pem"
  ## Use TLS but skip chain & host verification
  # insecure_skip_verify = false

  ## HTTP Request Headers (all values must be strings)
  # [inputs.http_response.headers]
  #   Host = "github.com"

  ## Interface to use when dialing an address
  # interface = "eth0"

# # Collect statistics about itself
# [[inputs.internal]]
#   ## If true, collect telegraf memory stats.
#   # collect_memstats = true


# # Read metrics about network interface usage
[[inputs.net]]
## By default, telegraf gathers stats from any up interface (excluding loopback)
## Setting interfaces will tell it to gather these explicit interfaces,
## regardless of status.
##
interfaces = ["enx001e0636be71"]
##
## On linux systems telegraf also collects protocol stats.
## Setting ignore_protocol_stats to true will skip reporting of protocol metrics.
##
# ignore_protocol_stats = false
##


# # Read TCP metrics such as established, time wait and sockets counts.
[[inputs.netstat]]
  # no configuration


# Collect kernel snmp counters and network interface statistics
[[inputs.nstat]]
  ## file paths for proc files. If empty default paths will be used:
  ##    /proc/net/netstat, /proc/net/snmp, /proc/net/snmp6
  ## These can also be overridden with env variables, see README.
  proc_net_netstat = "/proc/net/netstat"
  proc_net_snmp = "/proc/net/snmp"
  proc_net_snmp6 = "/proc/net/snmp6"
  ## dump metrics with 0 values too
  dump_zeros       = true


# Ping given url(s) and return statistics
[[inputs.ping]]
  ## List of urls to ping
  urls = [
    "fritz-box.lan",
    "wlan-ap.lan",
    "drax.lan",
    "florianzirker.de",
    "t-online.de",
    "8.8.8.8",
    "4.2.2.2",
    "9.9.9.9",
    "example.com"
  ]

  ## Number of pings to send per collection (ping -c <COUNT>)
  # count = 1

  ## Interval, in s, at which to ping. 0 == default (ping -i <PING_INTERVAL>)
  ## Not available in Windows.
  ping_interval = 60.0

  ## Per-ping timeout, in s. 0 == no timeout (ping -W <TIMEOUT>)
  # timeout = 1.0

  ## Total-ping deadline, in s. 0 == no deadline (ping -w <DEADLINE>)
  # deadline = 10

  ## Interface or source address to send ping from (ping -I <INTERFACE/SRC_ADDR>)
  ## on Darwin and Freebsd only source address possible: (ping -S <SRC_ADDR>)
  # interface = ""

  ## Specify the ping executable binary, default is "ping"
  # binary = "ping"

  ## Arguments for ping command
  ## when arguments is not empty, other options (ping_interval, timeout, etc) will be ignored
  # arguments = ["-c", "3"]



# # Monitor process cpu and memory usage
# [[inputs.procstat]]
#   ## PID file to monitor process
#   pid_file = "/var/run/nginx.pid"
#   ## executable name (ie, pgrep <exe>)
#   # exe = "nginx"
#   ## pattern as argument for pgrep (ie, pgrep -f <pattern>)
#   # pattern = "nginx"
#   ## user as argument for pgrep (ie, pgrep -u <user>)
#   # user = "nginx"
#   ## Systemd unit name
#   # systemd_unit = "nginx.service"
#   ## CGroup name or path
#   # cgroup = "systemd/system.slice/nginx.service"
#
#   ## Windows service name
#   # win_service = ""
#
#   ## override for process_name
#   ## This is optional; default is sourced from /proc/<pid>/status
#   # process_name = "bar"
#
#   ## Field name prefix
#   # prefix = ""
#
#   ## When true add the full cmdline as a tag.
#   # cmdline_tag = false
#
#   ## Add PID as a tag instead of a field; useful to differentiate between
#   ## processes whose tags are otherwise the same.  Can create a large number
#   ## of series, use judiciously.
#   # pid_tag = false
#
#   ## Method to use when finding process IDs.  Can be one of 'pgrep', or
#   ## 'native'.  The pgrep finder calls the pgrep executable in the PATH while
#   ## the native finder performs the search directly in a manor dependent on the
#   ## platform.  Default is 'pgrep'
#   # pid_finder = "pgrep"


# # Read metrics from storage devices supporting S.M.A.R.T.
# [[inputs.smart]]
#   ## Optionally specify the path to the smartctl executable
#   # path = "/usr/bin/smartctl"
#
#   ## On most platforms smartctl requires root access.
#   ## Setting 'use_sudo' to true will make use of sudo to run smartctl.
#   ## Sudo must be configured to to allow the telegraf user to run smartctl
#   ## without a password.
#   # use_sudo = false
#
#   ## Skip checking disks in this power mode. Defaults to
#   ## "standby" to not wake up disks that have stoped rotating.
#   ## See --nocheck in the man pages for smartctl.
#   ## smartctl version 5.41 and 5.42 have faulty detection of
#   ## power mode and might require changing this value to
#   ## "never" depending on your disks.
#   # nocheck = "standby"
#
#   ## Gather all returned S.M.A.R.T. attribute metrics and the detailed
#   ## information from each drive into the 'smart_attribute' measurement.
#   # attributes = false
#
#   ## Optionally specify devices to exclude from reporting.
#   # excludes = [ "/dev/pass6" ]
#
#   ## Optionally specify devices and device type, if unset
#   ## a scan (smartctl --scan) for S.M.A.R.T. devices will
#   ## done and all found will be included except for the
#   ## excluded in excludes.
#   # devices = [ "/dev/ada0 -d atacam" ]
#
#   ## Timeout for the smartctl command to complete.
#   # timeout = "30s"


# # Sysstat metrics collector
# [[inputs.sysstat]]
#   ## Path to the sadc command.
#   #
#   ## Common Defaults:
#   ##   Debian/Ubuntu: /usr/lib/sysstat/sadc
#   ##   Arch:          /usr/lib/sa/sadc
#   ##   RHEL/CentOS:   /usr/lib64/sa/sadc
#   sadc_path = "/usr/lib/sa/sadc" # required
#
#   ## Path to the sadf command, if it is not in PATH
#   # sadf_path = "/usr/bin/sadf"
#
#   ## Activities is a list of activities, that are passed as argument to the
#   ## sadc collector utility (e.g: DISK, SNMP etc...)
#   ## The more activities that are added, the more data is collected.
#   # activities = ["DISK"]
#
#   ## Group metrics to measurements.
#   ##
#   ## If group is false each metric will be prefixed with a description
#   ## and represents itself a measurement.
#   ##
#   ## If Group is true, corresponding metrics are grouped to a single measurement.
#   # group = true
#
#   ## Options for the sadf command. The values on the left represent the sadf
#   ## options and the values on the right their description (which are used for
#   ## grouping and prefixing metrics).
#   ##
#   ## Run 'sar -h' or 'man sar' to find out the supported options for your
#   ## sysstat version.
#   [inputs.sysstat.options]
#     -C = "cpu"
#     -B = "paging"
#     -b = "io"
#     -d = "disk"             # requires DISK activity
#     "-n ALL" = "network"
#     "-P ALL" = "per_cpu"
#     -q = "queue"
#     -R = "mem"
#     -r = "mem_util"
#     -S = "swap_util"
#     -u = "cpu_util"
#     -v = "inode"
#     -W = "swap"
#     -w = "task"
#   #  -H = "hugepages"        # only available for newer linux distributions
#   #  "-I ALL" = "interrupts" # requires INT activity
#
#   ## Device tags can be used to add additional tags for devices.
#   ## For example the configuration below adds a tag vg with value rootvg for
#   ## all metrics with sda devices.
#   # [[inputs.sysstat.device_tags.sda]]
#   #  vg = "rootvg"


# Gather systemd units state
# [[inputs.systemd_units]]
#   ## Set timeout for systemctl execution
#   # timeout = "1s"
#   #
#   ## Filter for a specific unit type, default is "service", other possible
#   ## values are "socket", "target", "device", "mount", "automount", "swap",
#   ## "timer", "path", "slice" and "scope ":
    # unittype = "service"

# # Read metrics about temperature
[[inputs.temp]]
  # no configuration


# # Reads metrics from a SSL certificate
#[[inputs.x509_cert]]
  ## List certificate sources
  #sources = ["/etc/ssl/certs/ssl-cert-snakeoil.pem", "tcp://example.org:443"]
  #sources = ["https://florianzirker.de:443", "https://cloud.florianzirker.de:443", "https://wallabag.florianzirker.de:443", "https://gitea.florianzirker.de:443", "https://meet.florianzirker.de:443", "https://www.feuerwehr-kapsweyer.de:443"]

  ## Timeout for SSL connection
  # timeout = "5s"

  ## Pass a different name into the TLS request (Server Name Indication)
  ##   example: server_name = "myhost.example.org"
  # server_name = ""

  ## Optional TLS Config
  # tls_ca = "/etc/telegraf/ca.pem"
  # tls_cert = "/etc/telegraf/cert.pem"
  # tls_key = "/etc/telegraf/key.pem"